Carpet Cleaner Instructions

Thanks for renting a Carpet Cleaner with Green Gooding.

Here are some instructions to help you make the best use of this equipment.

1.Fill the clean water tank with a solution

To remove the tank, lift it straight up and pull away from the unit. Pull on the black tab to reveal the tank opening.The plug rotates out of the way for filling. Put the plug back after filling the tank with water and soap solution (you can use laundry detergent or cleaning product). Replace the tank by lining up the tank bottom with the indentations on the machine. Press down firmly on the tank to assure it’s in a secure position.

2.Release the flex hose and plug the cleaner

Release the flex hose from the hose grip bracket and unwrap the flex hose completely from around the unit. Twist the quick release cord wrap clockwise and unwrap the power cord completely then plug into a grounded outlet.

3.Spray, scrub and vacuum

Spray the area you want to clean with the flex hose (water release button under the hose) with the spray trigger released, gently scrub the stain with the brush attachment. To lift away the stain, apply downward pressure on the tool and slowly pull it toward you. Continue until no more dirt can be removed. As a final step, use drying strokes to remove as much moisture as possible. Repeat this step as often as necessary.

4.Empty the dirty water tank and rince it

Empty the dirty water tank (do not go beyond the limit or it will leak) as often as you need. When done cleaning rince the tank with clean water. (tip: vacuum clean water a few times to clean the hose and the tank).

We hope these tips have helped you become more familiar.

Thanks again